Made in Taiwan Baby Dolls Curly Blonde Hair

Download Article

Download Article

If you fabricated a crochet or amigurumi doll, you volition need to give him or her some hair. You tin ever accept the easy route, and give your doll straight hair, merely why not effort curly hair? With a few actress steps, you can create cute, curly hair for your doll! If you lot desire to give a cloth doll curly hair, don't worry, yous can still utilise these methods; you will need to create a crochet wig cap first.

1. 1

   Have a crochet doll ready. This method works best on crochet amigurumi dolls. If your doll is fabricated from textile, or any other material, you will have to crochet a wig cap for the doll start, follow this method, then attach the wig cap.

2. 

   2

   Wrap the yarn tightly around a thin dowel. The thinner the dowel, the tighter the roll will be. Something around 3/8-inch (0.95-centimeter) would be platonic, however. Make sure that you are simply wrapping the yarn in a single layer; don't let the yarn overlap.

   • Yous tin can likewise use a knitting needle instead. A size iv, or smaller, would be ideal.^[1]
   • Loosen the first and last loops, then tuck the tails ends under them. Tug on the tail ends to tighten the loops. This will keep the yarn from unraveling.^[2]

   Advertising

3. 

   3

   Soak the yarn with boiling water, then blot the excess. Boil some water in a pot or kettle first, then cascade it over the yarn. Utilise a towel to gently blot any excess water. You want information technology to be soaked, simply not dripping.

4. 

   4

   Place the dowel on a rimmed backing sheet. Brand sure that the ends of the dowels resting on the rim. Do not let the remainder of the dowel or the yarn touch the actual baking sheet. If you let the yarn touch the canvass, it may not dry properly. The hot metallic may also scorch the yarn.^[iii]

5. 

   v

   Bake the yarn in your oven until information technology is dry out. Preheat your oven to the lowest temperature possible, about 200 to 250°F (94 to 122°C) first. One time it reaches the right temperature, stick the yarn into the oven. Permit it bake until information technology is completely dry, about minutes.^[4]

   • Check on the every 15 minutes, especially if it is acrylic, and then that it doesn't melt.^[5]
   • If you are using a "soft" variety of yarn, heighten the temperature to 300F, and broil it for 55 minutes instead.^[half-dozen]

6. 

   6

   Let the yarn to cool before unwrapping information technology. This volition have virtually 10 minutes. Once the yarn has cooled, gently unravel it from the dowel.^[7] As you unwrap it, it should hold its curl.

7. 

   vii

   Wrap yarn around base object. Choose a book, folder, CD case, or even a piece of cardboard that is about twice the length yous want the hair to be. Wrap the curled yarn around the base object tightly, so that the strands become directly. Proceed wrapping until you run out of yarn.

8. 

   viii

   Cut the wrapped yarn forth one edge. When you lot wrapped your yarn around your base object, you will have 2 folded edges. Cull one, and cut along it. Slid the yarn off of the base object, only continue it folded. The fold will be your guide for the adjacent pace.

   • Consider separating the yarn into individual strands. You will become about 4 strands from each slice of yarn. Treat these 4 strands as a unmarried strand for the rest of this method.^[8]

9. 

   9

   Attach the yarn to the doll's head with a slip sew together. Push your crochet hook through a stitch on your doll's hairline. Catch the curled strand by the middle. Pull a loop dorsum through the stitch with your claw. Pull the tails through loop, and then tug on them gently to tighten the loop.^[nine]

   • If y'all are using a crocheted wig cap, so push the claw through a stitch on the wig cap.

10. 

    x

    Continue attaching the yarn to your doll'southward caput. Start around the outer edge, where the hairline is, and work your way towards the center in rings. You don't have to insert the yarn into every sew together, particularly if your doll is very small.

    Advertisement

1. 1

   Take a crochet doll set. This method works best on crochet amigurumi dolls. If your doll is made from fabric, or any other material, you will have to crochet a wig cap for the doll first, follow this method, and so adhere the wig cap.

2. 

   2

   Adhere the yarn to the back of the doll's caput with a skid stitch. Poke your crochet hook through a stitch on the dorsum-right of the doll's head. Pull a loop of yarn dorsum through the sew together with the claw. Go out behind a brusk tail of yarn.^[10]

   • Where you outset crocheting will be the edge of the pilus line. Plan carefully!
   • Use a crochet hook that matches your yarn. When you buy your yarn, look at the label to find out what kind of claw you should utilize.

3. 

   3

   Chain stitch your first strand. One time you lot have the yarn fastened to the doll'south caput, begin making your first chain sew together. Brand it twice as long as you want the hair to be. Hair shortens equally information technology curls. If you lot go far the right length at the start, information technology volition end up as well short in the end!^[xi]

4. 

   4

   Go back down the concatenation. Insert your hook through the third chain from the hook. Pull a loop of yarn through the concatenation. Begin slip stitching downwards the length of the chain until you reach the base.^[12]

   • If your doll is large, or if you want thicker curls, use a unmarried crochet instead of a sideslip sew together.^[xiii]

5. 

   5

   Close the strand with a slip stitch, then move on to the side by side infinite. Insert your claw dorsum into the starting stitch on the doll's head, and out the next one. If your doll has thick hair, your might want to poke the hook out a few stitches over instead.^[14]

6. 

   6

   Get-go your second curl, catching the tail end of the yarn under the commencement chain. Before y'all make the first concatenation, place the tail stop of the yarn over your work. Chain stitch right over the tail stop, pinning it down.^[15]

7. 

   7

   Continue crocheting your doll's hair. Keep making bondage until your achieve the left side of the doll'southward head. By at present, the tail should be completely hidden. If it isn't, you tin trim information technology down now.

8. 

   8

   Motility onto the next row. Poke your claw back into the stitch you just attached your last curlicue to. Instead of poking the hook out of the next sew on the left, poke the claw out of the next run up higher up.

9. 

   nine

   Finish crocheting your doll's hair. Continue working left to correct, correct to left, in zigzags until you reach the front hairline. Try to follow your doll's hairline—y'all tin can practice this by making each row a picayune wider than the one below it. You lot can also lightly sketch out a hairline using a washable dressmaker's marker.

   • The chains will curl naturally on their own. You lot can help them curl further by wrapping them around your finger.

10. 

    10

    Cutting the yarn and pull it through the terminal loop. When you lot cease your last curlicue, cut the yarn, leaving behind a tail. Employ your hook to pull the tail back through the last loop of yarn. Gently tug on the tail to tighten the loop.^[16]

11. 

    xi

    Stitch downwardly the concluding row of hair, if desired. This is non absolutely necessary, but it volition help the hair on your doll lay down better. Start past threading the tail through a yarn needle. So:^[17]

    • Pull the needle through a stitch betwixt the last two rows of curls.
    • Push information technology through the first curl on the terminal row, close to the base.
    • Bring the needle downward through the next stitch.
    • Continue stitching beyond the head, catching curls as you go.
    • Tie the yarn to the last stitch, weave the tail under a few stitches, so cut it.

    Advertizing

1. 

   ane

   Brand a crochet wig cap if you lot do not have a crochet or amigurumi doll. Once you have attached the hair to the wig cap, you tin then sew or mucilage the wig cap to your doll. Use the aforementioned type of yarn as you will for your doll's pilus.

2. 

   two

   Start a magic band. Make a loop with the yarn, overlapping the working and tail ends. Pull the working finish of the yarn through the middle of the ring. Pull it up towards the top border of the band and make a chain sew.^[18]

3. 

   3

   Do your first round in the magic ring. Make 6 unmarried crochets in the magic ring. Finish with a slip run up in the first single crochet. Gently tug on the tail to tighten the stitches.^[19]

4. 

   4

   Outset your 2nd round. Chain sew together two. Exercise two half-double-crochets in each sew. When you reach the end of the circular, shut it with a sideslip stitch in your first half-double-crochet.^[20]

5. 

   5

   Do your first increasing round. Offset your third round with two chain stitches. Next, exercise a half-double-crochet in the side by side stitch, followed by two half-double-crochets in the second sew. Exercise this 6 times, and so close the round with a slip stitch in the first one-half-double-crochet.^[21]

6. 

   6

   Make your second increment for the fourth round. Start with ii chain stitches. Next, exercise a one-half-double-crochet in each sew together over the next two stitches. (This is your increase). Follow it upwardly with two half-double-crochets in the 3rd stitch. Exercise this six times, then close the round with a skid run up in the first one-half-double-crochet.^[22]

7. 

   7

   Brand your third increase for the fifth round. Commencement with 2 chain stitches. Side by side, practice a half-double-crochet in each stitch over the side by side 3 stitches. (This is your increase). Follow it with 2 one-half-double-crochets in the 4th sew. Do this half-dozen times. Shut the round with a slip sew together in the first half double crochet.^[23]

8. 

   viii

   Continue making increases until your wig cap is one round away from existence the right size. The wig cap needs to be big plenty to fit over your doll's caput and extend from hairline to hairline.^[24]

9. 

   9

   Finish off with a half, increasing round. Start with 2 chain stitches, so 2 half-double-crochets in the first run up. Go on where you lot left off with your increases: a half-double-crochet in each sew. Instead of going for the entire round, stop when you are one-half-way beyond.^[25]

10. 

    x

    Finish off with a sideslip sew together in the next sew together, then cut your yarn and tie it off. You will exist left with something that looks like a cap, but that is longer on one end. This longer cease goes on the front of the doll's head. The shorter terminate goes on the back.

    Ad

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advertisement

• If yous are crocheting a doll, consider switching to the pilus color when you accomplish the scalp. This manner, there won't exist whatever skin color to bear witness through the hair.

• If you are crocheting a wig cap, utilize the same color as your doll's pilus.

• Yous can do these methods with whatever type of yarn and claw, simply they need to match. Read your yarn'southward characterization to notice out what type of hook you should exist using.

• Light to medium weight yarn works best for doll hair.

Thank you for submitting a tip for review!

Advertisement

Things You'll Need

• Amigurumi or crochet doll
• Yarn
• Crochet hook
• Yarn needle
• Scissors
• Dowel
• Oven
• Rimmed baking sheet

• Amigurumi or crochet doll
• Yarn
• Crochet hook
• Yarn needle
• Scissors

• Yarn
• Crochet claw
• Scissors

About This Article

Thanks to all authors for creating a page that has been read 30,293 times.

Did this article help you lot?

hunterwassinithe.blogspot.com

Source: https://www.wikihow.com/Make-Curly-Doll-Hair-with-Yarn

Share this post